Remote Operation Via Batch Configuration Tool; Activating Device Remotely - HIKVISION DS-KD8102 User Manual

8 Remote Operation via Batch
Configuration Tool
You can configure and operate the video intercom devices via Batch Configuration Tool.
Default parameters of door station are as follows:
 Default IP Address: 192.0.0.65.
 Default Port No.: 8000.
 Default User Name: admin.

8.1 Activating Device Remotely

Purpose
You are required to activate the device first by setting a strong password for it before
you can use the device.
Activation via Batch Configuration Tool, and Activation via iVMS-4200 are supported.
Here take activation via Batch Configuration Tool as example to introduce the device
activation. Please refer to the user manual for the activation via iVMS-4200.
Steps:
1. Run the Batch Configuration Tool.
2. Select an inactivated device and click the Activate button.
Video Intercom Door Station·User Manual
Figure 8-1 Selecting Inactive Device
Figure 8-2 Activation
38