Table of Contents
Advertisement
3.2.
Installing and Charging the Batteries
1.
Slide down to open the battery compartment cover.
2.
Place the 2 batteries as indicated. Pay extra attention to direction of
Respect polarity.
3.
Slide the battery compartment cover back.
4.
Put the handset on the base and charge for 8 hours before using the
handset for the first time. The handset will give a beep when it is properly
placed on the base or charger.
Notes:
1.
Use only NiMH rechargeable batteries.
2.
If the handset will not be used for a long time, disconnect and remove the batteries
to prevent possible leakage.
3.3.
Connecting the Charger
Plug the power adapter into a 230Vac, 50Hz mains socket.
After first time power up (base unit is connected to AC mains), welcome
mode (country) will appear on the screen:
(s) (for Duo/Trio models)
8
e.g.
01-01-2021
e.g. 00:00
Hide quick links:
Advertisement
Table of Contents
