JVC KS-BTA200 Instructions Manual page 7

Installing the microphone unit
1
Attach the microphone to the
microphone clip.
Microphone
(supplied)
Microphone clip
(supplied)
To adjust the microphone angle
2
To Interface
adapter unit
Install the microphone unit.
To install on the sun visor
Microphone unit (supplied)
Secure the microphone cord using cord
clamps (not supplied) if necessary.
To install on the steering column
Install the microphone unit on the top side of the
steering column.
microphone unit (supplied)
Double-sided adhesive
tape (supplied)
Introduction 7