Maintenance - Craftsman CMCBL710 Instruction Manual

20v max* axial blower
Hide thumbs Also See for CMCBL710:
Table of Contents

Advertisement

Available languages

Available languages

English
Inserting and Removing the Battery Pack from
the Tool (Fig. D)

WARNING:
battery, make certain the trigger switch
position to prevent switch actuation.
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool Handle
Align the battery pack
 7 
handle (Fig. D).
Slide it into the handle until the battery pack is firmly
seated in the tool and ensure that you hear the lock snap
into place.
To Remove the Battery Pack from the Tool
Press the release button
 8 
out of the tool handle. Insert it into the charger.

WARNING:
without blow tube securely in place. Never reach down into
housing through tube hole.

WARNING:
Wear a filter mask if the operation is dusty. Use of rubber
gloves and substantial footwear is recommended when
working outdoors. Keep long hair and loose clothing away
from openings and moving parts. For household use only.

WARNING:
the tool off, wait 10 seconds for the fan to stop rotating
before removing the blower tube.
• Always ensure the blower is switched OFF and the battery
is removed when:
- You leave blower unattended.
- Clearing a blockage.
- Checking, adjusting, cleaning or working on blower.
• Only use blower in daylight or good artificial light.
Switching On and Off (Fig. A, C)

CAUTION:
self or bystanders.

CAUTION:
Wear a filter mask if the operation is dusty. Use of gloves,
long pants and substantial footwear is recommended.
Keep long hair and loose clothing away from openings and
moving parts.
1. To turn the blower ON, squeeze the trigger switch 
2. To turn the blower OFF, release the trigger switch 

MAINTENANCE


WARNING:
serious personal injury, turn unit off and remove
the battery pack before making any adjustments or
removing/installing attachments or accessories. An
accidental start-up can cause injury.
Your CRAFTSMAN power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
6
Before removing or installing
1
is in the off
is fully charged.
 7 
with the rails inside the tool's
and firmly pull the battery pack
Do not operate blower
Always wear safety glasses.
Cut Hazard. When turning
Do not point unit discharge at
Always wear safety glasses.
To reduce the risk of
Cleaning

WARNING:
air vents with clean, dry air at least once a week. To minimize
the risk of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.

WARNING:
harsh chemicals for cleaning the non-metallic parts of the tool.
These chemicals may weaken the plastic materials used in
these parts. Use a cloth dampened only with water and mild
soap. Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Accessories

WARNING:
than those offered by CRAFTSMAN, have not been tested
with this product, use of such accessories with this tool could
be hazardous. To reduce the risk of injury, only CRAFTSMAN
recommended accessories should be used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN. Call 1‑888‑331‑4569.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.

WARNING:
and RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a factory service
center or an authorized service center. Always use identical
replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will help
you obtain more efficient warranty service in case there is a
problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration of
ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.craftsman.com/account/login.
Three‑Year Limited Warranty
For warranty terms, go to www.craftsman.com/pages/
.
 1 
warranty.
 1 
.
To request a written copy of the warranty terms, contact:
Customer Service at CRAFTSMAN, 701 East Joppa Road,
Towson, MD 21286 or call 1‑888‑331‑4569.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country‑specific warranty information contained in
the packaging, call the local company, or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑888‑331‑4569
for a free replacement.
Blow dirt and dust out of all
Never use solvents or other
Since accessories, other
To assure product SAFETY

Advertisement

Table of Contents
loading

Table of Contents