Video Flicker Reduction; [Video Flicker Reduction] - Nikon Z 9 Reference Manual

Video Flicker Reduction

Reduce flicker and banding when shooting under fluorescent or
mercury-vapor lighting during video recording. Choose [Auto] to allow
the camera to automatically choose the correct frequency. If [Auto] fails
to produce the desired results, select [50 Hz] or [60 Hz] according to the
frequency of the local power supply. Choose [50 Hz] for areas with a
50 Hz power supply, [60 Hz] for areas with a 60 Hz power supply.
D
Cautions: [Video Flicker Reduction]
•
If [Auto] fails to produce the desired results and you are unsure as to the
frequency of the local power supply, test both the 50 and 60 Hz options
and choose the one that produces the best results.
•
Flicker reduction may not produce the desired results if the subject is very
bright. If this is the case, try choosing a smaller aperture (higher f-number).
•
Flicker reduction may fail to produce the desired results in modes other
than M. If this is the case, select mode M and choose a shutter speed
adapted to the frequency of the local power supply:
1
- 50 Hz: / s,
100
1
- 60 Hz: / s,
125
1 1
/ s, / s
50 25
1 1
/ s, / s
60 30
1 The Video Recording Menu: Video Recording Options
G button U 1 video recording menu
585