Nikon Z 9 Reference Manual page 172

4
Position the white balance target ( r )
over a white or gray object and measure
a value for preset manual white
balance.
•
Position the target ( r ) using the multi
selector.
•
To measure white balance, press the shutter-release button all the
way down or press J .
•
You can also position the target ( r ) and measure white balance
by tapping the display.
•
Target selection will not be available if an optional flash unit is
attached. Frame the shot so that the white or gray reference
object is in the center of the display.
•
If the camera is unable to measure white balance, a message will
be displayed and the camera will return to direct measurement
mode. Try measuring white balance again, for example with the
target ( r ) positioned over a different area of the subject.
5
Press the i button to exit direct measurement mode.
White Balance
172