Nikon Z 9 Reference Manual page 341

7
Obtain or select an IP address.
•
Highlight one of the following options
and press J .
Option
[Obtain
automatically]
[Enter
manually]
•
Press J to proceed when the "configuration complete" message is
displayed.
Select this option if the network is configured to
supply the IP address automatically. A
"configuration complete" message will be
displayed once an IP address has been assigned.
Enter the IP address and sub-net mask manually.
•
Press J ; you will be prompted to enter the IP
address.
•
Rotate the main command dial to highlight
segments.
•
Press 4 or 2 to change the highlighted segment
and press J to save changes.
•
Next, press X ; a "configuration complete"
message will be displayed. Press X again to
display the sub-net mask.
• Press 1 or 3 to edit the sub-net mask and press
J ; a "configuration complete" message will be
displayed.
Computers: Connecting via Ethernet or Wireless LAN
Description
341