Nikon Z 9 Reference Manual page 363

❚❚ The [Connect to Computer] Camera Control
Display
The [Connect to computer] display shows the following:
D
Loss of Signal
Loss of signal while the camera is connected to a wireless network may
disrupt the connection to Camera Control Pro 2. If the camera network
indicator flashes amber, select [End current connection] for [Connect to
computer] > [Network settings] in the network menu before connecting to
the network again. When the signal is re-established, the camera will
reconnect to Camera Control Pro 2 and resume upload of any pictures that
have yet to be transferred. Note that upload cannot be resumed if you turn
the camera off before transfer is complete.
1
1
2
3 2
3
Computers: Connecting via Ethernet or Wireless LAN
Status: The status of the
connection to the host. The
profile name is displayed in
green when a connection is
established. Errors are also
displayed here ( 0 397).
Signal strength: Ethernet
connections are shown by d .
When the camera is connected
to a wireless network, the icon
instead shows the wireless
signal strength.
Band: The band used by the
wireless network to which the
camera is connected in
infrastructure mode.
363