Table of Contents
Advertisement
4.2 Connecting the Flowcell – Fig. 4.2
Push on firmly the sensor connector and
tighten ONE TURN clockwise.
1
Line up the red spots and push on firmly the
plug until the locking ring engages.
Note.
• The plug is a latching type to prevent it's
accidental removal. To remove, pull out
holding the plug at its widest point.
• The plug is protected against spillage
and corrosion by a sleeve which slides
over it
Fig. 4.2 Electrical Connections at the Flowcell
...4 SETTING UP
2
13
Advertisement
Table of Contents
