ERNITEC Mercury SX32 Series User Manual page 12

Step 8: A prompt window requesting for default username and password will
Installing Viewer Software Online
For the initial access to the IP camera, a client program, Viewer, will be
automatically installed to the PC when connecting to the camera.
If the web browser doesn't allow Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
section
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser.
Right click on the Information Bar and select <Install ActiveX Control...> to
allow the installation.
The download procedure of Viewer software is specified as follows.
Step 1: In the Viewer installation window, click on <Next> to start
4.
Step 2: The status bar will show the installation progress. After the
5.
Step 3: Click on <Finish> to close the Viewer installation page.
V 1.01.072015
appear. Enter the default username and password shown below to
login to the camera.
Login ID
Admin
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator's password
be altered for the security concerns. Refer to the Full HD
Multi-Streams IP Camera Menu Tree in the supplied CD
for further details.
Setup Internet Security) to continue the process.
installation.
installation is completed, click on <Finish> to exit the installation
process.
Password
1234
www.ernitec.com
User's Manual – Mercury SX32x series
11