Table of Contents
Advertisement
GENERAL OPERATION
7
REL
ATP
TURNING THE POWER ON ......................................1
Install the front panel and press the POWER MUTE button 1 when ACC is on.
TURNING THE POWER OFF ............................................................. 1
Press the POWER MUTE button 1 for more than 2 seconds. Display will revert to clock indication.
VOLUME LEVEL CONTROL.......................................2
Rotate the VOL dial 2 to adjust the volume level.
MUTING THE SOUND .......................................................................... 1
Press the POWER MUTE button 1 while the receiver is on. While muting the sound, the MUTE indicator
on the display is blinking. To restore the previous volume level, press POWER MUTE button 1
again.
SETTING THE CLOCK ..................................3, 2, 6, 7
The clock uses a 24-hour display system.
1.
Press the DISP button 3 for more than 2 seconds.
2.
Press the following buttons to set the clock.
VOL dial 2
: Adjust the hour and minutes.
TUN/TRK
6 : To activate Hour blink.
TUN/TRK
6 : To activate Minute blink.
BAND ATP 7
: Adjust the minutes to zero.
(Example) 12:29 → 12:00
3.
Press the DISP button 3 to activate the clock.
IGNITION-OFF CLOCK RECALL .............................3
Press the DISP button 3 while the ignition switch is in the "OFF" position.
The display will illuminate showing the time and then automatically shut off after 5 seconds.
3
FM /AM CD RECEIVER
LO/DX
1
2
LOUD
5
12:30 → 13:00
FXD-785GD 50W x 4
SHF
RPT
3
4
5
6
GB–5
2
VOL
TUN
TUN
TRK
TRK
MUTE
AUDIO
POWER
1
4
6
Advertisement
Table of Contents
