Error Signs - Sanyo FXD-785GD Operating Instructions Manual

PLACING THE CD IN PAUSE MODE ................................................ 5
While playing a CD, press the Preset 6 (
To resume playing, press the Preset 6 (
REPEAT MODE .................................................................................. 6
Press the Preset 5 (RPT) button 6 to play the current track repeatedly.
The "RPT" indicator appears in the display window.
To cancel this mode, press the Preset 5 (RPT) button 6 again.
SHUFFLE MODE ................................................................................ 7
This function plays the tracks on a CD in random order.
Press the Preset 4 (SHF) button 7 to begin shuffle play.
The "SHF" indicator appears in the display window.
Press the button 4 to select another random track.
To cancel this mode, press the Preset 4 (SHF) button 7 again.
SCAN MODE (PLAYING THE BEGINNING
OF EACH TRACK) ............................................................................. 8
This function plays the first 10 seconds of each track sequentially.
Press the SCAN button 8 to begin the scan mode.
The "SCAN" indicator appears in the display window.
To cancel this mode, press the SCAN button 8 again.

ERROR SIGNS

If a problem should occur while operating the CD player, one of the following error signs may be displayed.
Refer to the table below to identify the problem, then take the suggested corrective action. If the error
persists, contact your nearest dealer.
Message
) button 5.
) button again.
Cause
Dirty disc.
Scratched disc.
Up-side-down.
Focus error.
Data and focus error,
Mechanical problem.
Eject and loading error.
GB–12
Remedy
Clean the disc.
Replace the disc.
Check the disc.
Try ejecting and re-inserting
under normal temperature
conditions.
Under normal temperature
conditions, eject and insert
clean, undamaged disc
properly.
Eject and re-insert.
Eject and re-insert.