IQAmerica VD-8810L Instruction Manual page 9

2) Camera position & Field of View (FOV)
The Camera Door Unit can be mounted in a variety of locations. Review the
information below before installation. It is suggested that you experiment with
different mounting locations by holding the camera in position, pressing the doorbell
pushbutton then checking the image on the LCD monitor.
The diagrams below show an example camera position to view a visitor 500mm
from the camera.
• Camera tilt angle = 0 Deg. (this is the default setting).
• Camera mounting height approx. 1500mm
SIDE VIEW
The Camera Door Unit can be mounted in a lower position or on the left or right
side. The target shooting area can be adjusted as shown below.
• Camera tilt angle = 15 Deg. (upward).
• Lower mounting height approx. 1100mm
SIDE VIEW
46 Deg.
500mm
46 Deg.
500mm
560mm
SHOOTING AREA
59 Deg.
TOP VIEW
• Camera pan angle = 15 Deg. (to the right).
• Camera mounted to left side
620mm
TOP VIEW
9