Recording Video Images; Changing The Number Of Images Recorded - IQAmerica VD-8810L Instruction Manual

Recording Video Images

Automatic Recording
Video images are automatically recorded each time a visitor presses the doorbell
pushbutton. Each image has a date and time stamp that indicate when the visit
occurred. The system can store a maximum of 163 images; when this limit is
reached, the oldest image will be automatically deleted to allow a new image to be
stored.
By default, the number of images stored per visit is set to TWO; this can be
changed as described below.
Call
1
Answered
1 sec 1 sec

Changing the number of images recorded

1) Press and hold the "SNAP" button for two seconds.
• The options for number of recorded images will appear.
2) Press the "UP" and "DOWN" arrow buttons to select the required number of
images (1, 2 or 3).
3) Press the "OFF" button to complete the settings and exit.
Default setting
(2 images)
2
Still image 1 - captured 1 sec. after call
Still image 2 - captured 2 secs. after call
1st image
2nd image
19