Table of Contents
Advertisement
Installing the Camera Door Unit
1) Remove the main unit from the mounting base
1
Open the screw cover with a
flat blade screwdriver, then
loosen the screw using a
crosshead screwdriver.
2) Fix the mounting base on the wall at the height and location selected
Mounting screws
3) Install the batteries
Insert 6 x AA lithium batteries.
Please ensure to observe the
correct +/- polarity as shown.
Please use the specified batteries only.
Do not mix new and used batteries
CAUT ION
4) Adjust the camera lens angle
• The camera lens is adjustable to a maximum of 15 degrees.
• Please note that the video image may become slightly distorted if the camera
angle is set to maximum upper left/right adjustment.
10
2
Lift to remove the main unit
from the mounting base.
Holes drilled in wall.
Wall mounting plate.
Advertisement
Table of Contents
