Table of Contents
Advertisement
Other functions
Night-time Illumination
In low light night-time conditions, an infra-red LED light will
illuminate on the Camera Door unit to improve the quality of the
transmitted image. Note that the image will be displayed in black
& white under these conditions.
Pairing
The Door Camera and LCD Monitor are "paired" by a coding system so they will
only communicate with each other. This encoding provides a secure system so
your video and audio are not shared with others. This pairing is taken care of at the
factory for the units contained in your kit, hence no actions are necessary. However,
if for some reason you have to replace the Door Camera unit or LCD Monitor, follow
the procedure below to "pair" the new units together.
1) Remove the Door Camera from it's mounting bracket to expose the "Pairing"
button.
2) Remove the battery cover from the LCD Monitor to expose the "Pairing" button.
3) Press the "Pairing" button on the Door Camera unit. The LED in the Door
Pushbutton will blink for 30 seconds.
4) Whilst the LED in the Door Camera unit is blinking, press the "Pairing" button in
the LCD Monitor. You will hear five beeps to indicate that "Pairing" is complete.
Pairing Button
Portable indoor display unit
Pairing
Button
Outdoor camera unit
21
Advertisement
Table of Contents
