Table of Contents
Advertisement
Charging the Indoor Portable LCD Display unit.
The indoor portable LCD display unit will need to be charged for approximately 6 - 8
hours before first use.
1) Install the battery pack
1
Remove
the battery
compartment
cover.
2) Assemble the charging cradle
• Insert the plug from the AC adaptor into the
socket on the base of the charging cradle. Secure
the cable under the cord grip.
• Fit the charging cradle onto the stand and snap
into place.
2
Connect the battery connector to
the socket located in the battery
compartment. Seat the battery
pack into the compartment.
3) Plug the AC adaptor into a 120VAC outlet
4) Place the Indoor Portable LCD Display unit
Charging
indicator light
into the charging cradle
• A full charge will take around 6 hours,
longer if the unit is used during charging.
• The charging indicator light will extinguish
when charging is complete.
• It's ok to leave the LCD unit in the charging
cradle - it cannot be over-charged.
• Ensure the charging terminals are kept
free from dust and dirt.
• If the system is not being used for a period
of time, remove the battery pack.
3
Re-fit the battery
cover - do not
remove the foam
cushion.
13
Advertisement
Table of Contents
