IQAmerica VD-8810L Instruction Manual page 11

Angle
adjustment
lever
5) Re-fit the main unit to the mounting base
• Ensure to secure with the screw and replace the screw cover.
6) Optional ways of powering the camera door unit
The Camera Door unit can be used without batteries by connecting it directly to the
existing 12V−16V wired doorbell supply or to a 12V−16V external power pack.
A) Powering with an External Power Pack
1
Remove the main
unit from the
mounting base.
Examples of possible camera adjustment
Camera looks
upwards
Black end
2
Pass the bell wire or the wire
from the power pack through the
mounting plate before fixing the
plate to the wall. Connect the wire
to the supply terminals directly.
Adjust camera
view to the left
(max. 15deg.)
Adjust camera
view upwards
(Max. 15deg.)
Camera looks
to the right
Red end
Power supply wires
Power supply wires Power supply wires
Adjust camera
view to the right
(max. 15deg.)
Camera looks
up & right
3
Re-fit the main unit
to the mounting
base and secure
with the screw.
11