Philips 43HFL5114 Professional Installation Manual page 69

standby. When [Off], there will be no
power LED indication.
o [LED Power Indicator Intensity]: If [LED
Power Indicator] is set to [On], then
you can
[Minimum], [Medium] or [Maximum]
Note: [LED Power Indicator Intensity]
is only available for 19HFL5014W
bedside TV
o Navigate to the [Touch Control LED] menu
o You will see below items:
o [Blue]: You can define the intensity of
the blue LED for the clock and
nightlight button. You can set it to
[Off], [Minimum],
[Maximum]
o [White]: You can define the intensity of
the white LED for the touch controls.
You can set it to [Off], [Minimum],
[Medium] or [Maximum]
Note: [Touch Control LED] is only available
for 19HFL5014W bedside TV.
o Navigate to the [Security] menu
o You will see below items:
o [Professional Menu PIN Lock]: When
[On] you can set a 5 digits PIN code to
lock the professional menu, when
entering the professional menu using
the key sequence you will need to
enter the 5 digits, when [Off], this is
disabled
o [Professional Menu Keyboard Access]:
When [On], you will be able to use the
"F9" key on your keyboard to access
the professional menu using the
TeamViewer application or when you
have a keyboard connected to the TV.
When set to [Off], you will not be able
to access the professional menu via the
"F9" key on the keyboard.
Note: Some behavior will be depending
on your keyboard. In general, you will
be able to navigate using the arrows
and exit a menu using the Esc key
o [High Security]: When [On], the
professional setup menu can only be
accessed by the Master RC and not
using the key sequence via a Guest RC,
when [Off] you can use both
- 68 -
set the intensity to
[Medium] or