Philips 43HFL5114 Professional Installation Manual page 61

o Navigate to the [Wake on LAN (WoL)]
menu
o You will see below items:
o [Off]: Wake up via LAN is disabled
o [On]: Wake up via LAN enables an
external Server to wake up the TV from
complete Standby (green) using the
wired network connection.
Once you wake up TV using WoL, the
TV will go from green mode to fast
mode
o Navigate to
(WoWLAN)] menu
o You will see below items:
o [Off]: Wake up via WLAN is disabled
o [On]: Wake up via WLAN enables an
external Server to wake up the TV from
complete Standby (green) using the
wireless network connection.
Once you wake up TV using WoWLAN,
the TV will go from green mode to fast
mode
o Navigate to the [Forget Wi-Fi Network]
menu
o You will see below items:
o [Forget_All]: Remove all wireless
networks that the TV was connected to
o [List of connected Wi-Fi networks]:
Remove the selected wireless network
from the list
Note: This menu is only accessible if the
TV was ever connected to Wi-Fi, the list
of connected Wi-Fi networks depends
on the Wi-Fi connections made in the
past
o Navigate to the [Network Type] menu
o You will see below items:
o [Wired]: Connect your TV wired to the
network.
This is NOT the yellow connector on TV.
The yellow connector is to be used for
Serial Xpress. If you connect a network
cable to this connector, the TV will no
longer respond to IR commands
o [Wireless]: Connect your TV wireless to
the network
o [WPS]: Connect your TV wireless to the
network using WPS
- 60 -
the [Wake on Wi-Fi