Mychoice Rc Commands; Mychoice Remote Activation - Philips 43HFL5114 Professional Installation Manual

Compared to the previous platform the MyChoice packages are not mutually exclusive, meaning that
it will be possible to activate both package 1 and package 2 at the same time. Please keep this in mind
when creating the MyChoice packages as it requires a different mindset during the creation.
7.5.4

MyChoice RC commands

There are a couple of key combinations that can be used in relation to MyChoice. First of all if you are
using MyChoice and you want to debug or get more information about current packages, how many
keys are used per package and so on. You can open CSM menu and scroll down to the MyChoice CSM
page 9.
If you have a location which has frequent room changes for instance like a hospital. It's possible to
disable all currently active MyChoice subscriptions with the following key code "7 8 9 0 1 2 3".
This key combo will close all active packages. Pressing the key combo will also result in the current
used PIN code to become invalid. To reactivate the same package on MyChoice a new PIN code will be
required.
Note: In order to enter the key codes a professional RC might be needed
7.5.5

MyChoice remote activation

In an effort to automate the MyChoice activation process, we integrated a couple of new ways to
enable MyChoice packages remotely on a TV.
The MyChoice PIN code has become part of the clone file which makes it possible to remotely activate
any TV's MyChoice packages by flashing a new clone item.
In the MyChoice folder, you can find back two files. The identifier to check if the .json is newer than
the one in the TV and the MyChoice.json. This file contains the commands the TV will interpret to
either activate or deactivate MyChoice packages.
- 103 -