Advertisement
Quick Links
NOTICE
It is the Purchaser's/Owner's obligation:
1. To disclose and post all Rules & Regulations, Danger, Warning and Caution
labels affixed on the machine to their customers/users.
2. Equipment to be installed by TFI Authorized Dealer or a service company
approved by TFI.
3. Provide trained personnel, supervision and correct usage of the equipment.
4. Provide scheduled inspection, maintenance & repairs and must be performed
by TFI Authorized Dealer or a service company approved by TFI.
5. Must use only genuine TuffStuff replacement parts.
TUFFSTUFF FITNESS INTERNATIONAL
OWNER'S MANUAL
Maintenance & Assembly Instructions
IMPORTANT: KEEP THIS MANUAL FOR FUTURE REFERENCE
Basic Smith Machine/Half Cage
Combo w/Safety Stoppers
CSM-600
CSM-600_Rev0
Revision Date 04-28-2014
Advertisement
Related Manuals for TuffStuff CSM-600
Summary of Contents for TuffStuff CSM-600
- Page 1 3. Provide trained personnel, supervision and correct usage of the equipment. 4. Provide scheduled inspection, maintenance & repairs and must be performed by TFI Authorized Dealer or a service company approved by TFI. CSM-600_Rev0 5. Must use only genuine TuffStuff replacement parts. Revision Date 04-28-2014...
- Page 2 Should additional information be required, or should situations arise that are not covered by this owner’s manual, the matter should be directed to Customer Service at TuffStuff Fitness International, Inc. in Chino, California.
- Page 3 Overhead Specifications L 72” X W 80” X H 84” PRODUCT WEIGHT: 390 lbs MAX-LOAD WEIGHT LIMIT: 600 lbs Weight Load www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 4 Carefully read ALL Danger, Warning & Caution labels posted on the machine www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 5 Carefully read ALL Danger, Warning & Caution labels posted on the machine www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 6 Carefully read ALL Danger, Warning & Caution labels posted on the machine www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 7 You should have received it along with this Owners Manual� If you did not receive this Sign with your order, you can obtain one at no cost to you from TuffStuff Fitness by contacting our service department at: 1 (888) 884-8275 service@tuffstuff�net...
- Page 8 Stop exercising if you feel faint or dizzy. Consult a physician if you 10. Use only genuine TuffStuff replacement parts. Failure to do so will are experiencing pain. void warranty and could result in serious injury or death to the users.
- Page 9 Registration, Service & Assembly Thank you for purchasing the CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers. This machine is part of the TuffStuff line of quality strength training equipment. To maximize your use of the equipment, please study the Owner’s Manual thoroughly.
- Page 10 Professional Service Company approved by TFI. Keep a service log of all maintenance and repair activities. Extra copies can be downloaded from our website www.tuffstuffitness.com INSPECTION / MAINTENANCE RECORDS DATE REPLACEMENT REPAIRS INSPECTED BY WARRANTY REPAIRS DATE REPLACEMENT REPAIRS INSPECTED BY www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 11 Stopper Prongs (#85) of the Safety Stopper Posts (#12). Refer to Fig. C for further illustration. Fig. C Danger: Check that both Safety Stopper Brackets are fully engaged into the Stopper Prongs. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 12 Stopper Prongs (#85), it will be necessary to loosen some frame hardware then re-align the frame and re-tighten the hardware. If problem persists, Do Not Use the Machine and contact your TuffStuff Retailer or Customer Service (888) 884-8275. Disengaged Press Bar During Exercise 5.
- Page 13 WHEN NOT USING THE SMITH PRESS FEATURE, FULLY ENGAGE THE WEIGHT LIFT BAR ASSEMBLY (*20) ON HIGHEST WEIGHT STOPPER PRONGS (#85) AND THE SAFETY STOPPER BRACKETS (#18, #19) RIGHT BELOW, AS SHOWN BELOW� www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 14 Note: during the assembly process. If you are Assembling the CHL-610WS High/ Low Pulley w/200 lbs Weight Stack to the CSM-600, skip the assembly of the NYLON SNAP-IN FINISHING PLUG 3/8” (#78) Step 1 Assembly List Item Qty.
- Page 15 Loosely Tighten Loosely Tighten Loosely tighten all hardware in this step. DO NOT Fully Tighten. Some component(s) may need pre-assembly and or alignment during the assembly process. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 16 WEIGHT LIFT BAR ASSEMBLY RUBBER DONUT 1 X 2 1/2 Note: It is strongly recommended that two people participate in this assembly step. Note: Some parts have been removed for Clarity. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 17 SAFETY STOPPER BRACKET LT ASSEMBLY RUBBER DONUT 1 X 2 1/2 Note: It is strongly recommended that two people participate in this assembly step. Note: Some parts have been removed for Clarity. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 18 Do not remove cardboard from inside of the Bar BAR HOLDER Holders as it is used to hold the Plastic Glides in place. Slide the Bar Holders over the Selector Posts and the cardboard will slide out as shown. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 19 Loosely tighten all hardware in this step. DO NOT Fully Tighten. Some component(s) Note: may need pre-assembly and or alignment Some parts have been removed for Clarity. during the assembly process. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 20 Loosely Tighten Loosely Tighten Loosely tighten all hardware in this step. DO NOT Fully Tighten. Some component(s) may need pre-assembly and or alignment during the assembly process. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 21 Loosely tighten all hardware in this step. DO NOT Fully Tighten. Some component(s) may need pre-assembly and or alignment Note: during the assembly process. Some parts have been removed for Clarity. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 22 RUBBER WASHER 1 7/8 ID X 4 1/4 OD X 9/16 TK Wrench tighten all hardware in this step. 38 34 36 38 34 Note: Some parts have been removed for Clarity. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 23 Loosely tighten all hardware in this step. DO NOT Fully Tighten. Some component(s) may need pre-assembly and or alignment during the assembly process. Note: It is strongly recommended that two people participate in this assembly step. www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 24 Note: If you are Assembling the CHL-610WS High/ Low Pulley w/200 lbs Weight Stack to the CSM-600, skip the assembly of the NYLON SNAP-IN FINISHING PLUG 3/8” (#78) www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 25 Hooks are not engaging uniformly into the Stopper Prongs (#85), it will be necessary to loosen some frame hardware then re-align the frame and re-tighten the hardware. If problem persists, Do Not Use the Machine and contact your TuffStuff Retailer or Customer Service (888) 884-8275. Fully Tighten...
- Page 26 Parts List COLOR CHART CSM-600 *BLACK BOLD = PRE-ASSEMBLED COMPONENTS Parts List BLACK BOLD = SUBASSEMBLY COMPONENTS REV0 BLACK = HARDWARE ITEM DESCRIPTION REV. PART NO. QTY. ITEM DESCRIPTION REV. PART NO. QTY. 49 LABEL-DANGER USE THIS EQUIPMENT ONLY... BNH2903 50 LABEL-IMPORTANT FOR SMOOTH PERFORMANCE...
- Page 27 *19 SAFETY STOPPER BRACKET RT ASSEMBLY UP8198X1 *10 SAFETY STOPPER LT ASSEMBLY UP8189X1 *20 WEIGHT LIFT BAR ASSEMBLY UP8199X1 *11 SAFETY STOPPER RT ASSEMBLY UP8190X1 *22 TOP CROSS BRACE WITH CHIN UP BAR ASSEMBLY UP8187X1 www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 28 Pre-Assembled Components www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 29 Pre-Assembled Components www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 30 Pre-Assembled Components www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 31 Notes N o t e s www.tuffstuffitness.com CSM-600 Basic Smith Machine/Half Cage Combo w/Safety Stoppers...
- Page 32 No modification of this warranty or waiver of its terms shall be binding on either party unless approved in writing by an authorized repre- sentative of the party. Contact TuffStuff Fitness International at 13971 Norton Avenue, Chino, CA 91710, before returning any defective equipment.
Need help?
Do you have a question about the CSM-600 and is the answer not in the manual?
Questions and answers