fantastic furniture Eden Utility Pants Storage Clothes Rack Manual page 6

Step 3
You will need
8 x Dowels
8 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
Insert 8 x Dowels (H1) into
Left Side Panel (P2). Insert 8 x
Cam Nuts (H4) into Top/Base Panels (P1 x 2),
Shelf Panel (P4) and Rails (P6 x 2). Rotate
the nuts so the arrows point towards the
incoming bolts. Attach Top/Base Panels (P1 x 2),
Shelf Panel (P4) and Rails (P6 x 2) to Left Side Panel (P2)
by tightening all nuts with the Phillips Head Screwdriver.
Step 4
Slide Back Panels (P7 x 2 & P5 x 2) into the grooves
of Top/Base Panels (P1 x 2) and Shelf Panel (P4).
fantasticfurniture.com.au
Ensure the grooves in the Top/Base
Panels (P6 x 2) and Shelf Panel (P4) are
located at the back of the unit.
(P1)
(P7)
(P1)
(P7)
This is how a cam nut works........
Grooves for
back panels
(P4)
(P2)
Ensure laminated
side of panels are
facing inwards.
(P5)
(P4)
(P5)
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P1)
(P6)
(P1)
Page 6
(P6)