fantastic furniture Eden Utility Pants Storage Clothes Rack Manual page 5

Step 1
You will need
3 x Small
8 x Cam Bolts
Screws (H5)
(H3)
1 x Slide
Phillips Head
(H6)
Screwdriver
Attach 8 x Cam Bolts (H3) to Left Side Panel (P2) as shown by tightening with the
Phillips Head Screwdriver. Attach 1 x Slide Track (H6-1) to Left Side Panel (P2) with
3 x Small Screws (H5) as shown by tightening with the Phillips Head Screwdriver.
Step 2
You will need
3 x Small
8 x Cam Bolts
Screws (H5)
(H3)
1 x Slide
Phillips Head
(H6)
Screwdriver
Attach 8 x Cam Bolts (H3) to Right Side Panel (P3) as shown by tightening with the
Phillips Head Screwdriver. Attach 1 x Slide Track (H6-1) to Right Side Panel (P3) with
3 x Small Screws (H5) by as shown tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au
Separate the slide runners (H6-2) and slide tracks (H6-1) from Slide (H6)
by following the steps below. Extend the slide runner all the way
forward. Press the plastic release lever of the slide down and pull
the slide runner (H6-2) completely out.
(P2)
(P3)
Page 5