MA lighting grandMA3 Quick Start page 2

1. DMX A, B, C
2. MIDI In+Out
3. DC Remote Control
4. LTC
5. Power switch
6. IEC connector
7. Desk light
8. Kensington lock
9. Line In+Out
10. Ethernet 1+2
11. USB 2.0
12. USB 3.0
13. DisplayPort 1-4
Turn on the grandMA3 onPC command wing XT
1. Unpack the device.
2. Remove the packaging and cushioning material.
3. Place the device indoors on a stable surface.
4. Connect external monitors using the native DisplayPort connectors.
5. Connect an external mouse or keyboard using the USB ports.
6. Insert the power connector into the corresponding jack.
7. Connect the power plug with the mains.
8. Turn on the power switch on the rear panel.
2