Displaying The Data Code - Canon Optura 50 Instruction Manual

Displaying the Data Code

The camcorder maintains a data code containing recording date and time and other
camera data such as shutter speed and exposure (f-stop). When you play back a tape,
you can display the data code and select the data code combination you wish to display.
Selecting the Date/Time Display Combination
CAMERA
MENU
DISPLAY SETUP/
( 71)
1. Press the MENU button and select [DISPLAY SETUP/
2. Select [D/TIME SEL.] and select the date/time display combination.
In CARD PLAY mode, move to step 5.
3. Select [DATA CODE] and select the data code combination.
4. Press the MENU button.
5. Play back a tape and press the DATA CODE button.
• In CARD PLAY mode, only date and time appear.
• Pressing the DATA CODE button again makes the data code disappear.
The data code will not display the next time you turn on the camcorder.
PLAY (VCR)
DATA CODE button
CARD CAMERA
D/TIME SEL•••DATE & TIME
DATA CODE••••DATE/TIME
CARD PLAY
].
85
E