Troubleshooting - Canon Optura 50 Instruction Manual

Canon camcorder optura60/optura50 instruction manual
Hide thumbs Also See for Optura 50:
Table of Contents

Advertisement

Troubleshooting

Trouble?
If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a
Canon Service Center if the problem persists.
Power Source
Problem
Camcorder will not turn on.
The camcorder switches off
by itself.
Cassette compartment will
not open.
Cassette compartment
stopped during loading/
unloading.
LCD/viewfinder switches on
and off.
Battery pack will not charge.
Recording/Playback
Problem
Buttons will not work.
Abnormal characters appear
on the screen. The camcorder
does not operate properly.
"
" flashes on the screen.
"
" flashes on the screen.
"
" flashes on the screen.
"REMOVE THE CASSETTE"
appears on the screen.
The wireless controller will not
work.
Battery pack is exhausted. Replace or charge the battery
pack.
Attach the battery pack correctly.
Battery pack is exhausted. Replace or charge the battery
pack.
Power save function has been activated. Turn on the
camcorder.
Battery pack is exhausted. Replace or charge the battery
pack.
Open the cassette compartment cover fully.
Battery pack is exhausted. Replace or charge the battery
pack.
Battery pack is exhausted. Replace or charge the battery
pack.
Charge the battery pack in temperatures between 32 °F and
104 °F (0 °C and 40 °C).
Battery packs become hot with use and may not charge. Wait
until the battery pack temperature is below 104 °F (40 °C) and
retry charging.
The battery pack is damaged. Use a different battery pack.
Turn on the camcorder.
Load a cassette.
This camcorder uses a microcomputer. External noise or static
electricity may cause abnormal characters to appear on the
screen. In such case, disconnect the power source and
reconnect it after a short time. If the problem still persists,
disconnect the power source and press the RESET button
with a pointed item. Pressing the RESET button resets all
settings.
Load a cassette.
Battery pack is exhausted. Replace or charge the battery
pack.
Condensation is detected. See reference page.
Unload and reload the cassette.
Set [WL.REMOTE] to [ON].
The battery of the wireless controller is exhausted. Replace
the battery.
Solution
Solution
E
18
18
18
30
18
21
18
18
30
21
21
18
140
21
75
25
137

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optura 60Imagerunner 60

Table of Contents