List Of Messages - Canon DC100 Instruction Manual

Playing Back the Disc in an External DVD Device
External DVD device refers to DVD players, DVD recorders, computer's DVD drives and
other digital devices.
Problem
There is a brief stop between
scenes.
Disc is running, but image will
not appear on the TV screen.
The disc cannot be
recognized by the device. Or,
even though the disc is read,
cannot play back the disc or
the picture is distorted.
Cannot edit my recordings or
add recordings to the disc
with the DVD device.
When writing on a disc in this
camcorder recordings
transferred from a computer,
an error message appears.

List of Messages

Message
SET THE TIME ZONE,
DATE AND TIME
CHANGE THE BATTERY
PACK
TEMPERATURE TOO
HIGH CANNOT RECORD
TEMPERATURE TOO
HIGH CANNOT REMOVE
DISC
CANNOT RECORD
CHECK THE DISC
REACHED THE
MAXIMUM NUMBER OF
SCENES
CANNOT PLAY DISC
CANNOT EDIT DISC
Depending on the DVD player, there might be a very short
stop between scenes during playback.
TV/VIDEO selector on the TV is not set to VIDEO. Set the
selector to VIDEO.
You attempted to play back or dub an incompatible disc. Stop
playback/dubbing.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
The disc has not been finalized.
DVD-RW discs in VR mode can only be played back with VR
mode-compatible DVD players. Refer to the instruction
manual of your DVD device.
It may not be possible to edit or add recordings with an
external DVD recorder on a disc recorded with this camcorder.
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
Battery pack is exhausted. Replace or charge the battery pack.
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the battery
and let the camcorder cool down before resuming use.
There is a problem with the disc. Replace the disc.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
The disc's recording surface may be dirty or scratched.
The maximum number of scenes has been reached. Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.
The disc is dirty or you attempted to play back a disc type not
supported (not DVD-R/RW).
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
There are no scenes to edit or the recording is damaged.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
Solution
Explanation
E
–
64
–
72
61
–
–
–
20
17
–
22
73
–
22
55
–
73
–
73
69