Viewing Still Images - Canon DC100 Instruction Manual

Viewing Still Images

To use the still images functions, you will need to set [STILL IMAGES] to [ON] beforehand
( 11).
To change the operating mode, refer to About the Operating Modes (
Use the multi selector (
between images.
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a computer.
- Images whose file names have been changed.
Avoid the following actions while the DISC access indicator is on or flashing.
Failing to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or strong impacts.
- Do not open the disc cover and do not remove the disc.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the operating mode.
Slideshow
( 37)
FUNC.
1. Press
2. Select (
3. Select (
• Images are played back one after another.
FUNC.
• Press
Index Screen
1. Move the zoom lever toward W.
The stills index screen appears with the first six still images.
2. Select (
• Move the cursor
+
• Press or
3. Move the zoom lever toward T.
The index screen closes and the selected image is displayed.
30
) to move
SLIDESHOW
.
) [ SLIDESHOW] and press (
) [START] and press (
to stop the slideshow.
, ) an image.
to the image you want to view.
–
to move to the next or previous index page.
) .
) .
11).
Multi selector