Selecting The Recording Data Display - Canon DC100 Instruction Manual

Selecting the Recording Data Display

The camcorder keeps a data code containing the recording date and time and other
camera data such as shutter speed and exposure (f-stop).
To change the operating mode, refer to About the Operating Modes (
: [DATE], [TIME], [DATE&TIME] only.
Data Code display
You can select the data code display style on the screen.
MENU
( 33)
Options
[ DATE]
[ TIME]
[ DATE & TIME]
[ CAMERA DATA]
[ CAM.& D/T]
Selecting the Data Code
MENU
1. Press
2. Select (
3. Select (
4. Select (
MENU
5. Press
Turning the On-screen Displays On/Off
During playback, repeatedly press
on-screen displays on/off in the following sequence:
All on-screen displays + data code display on
Only the data code display on
All on-screen displays off
32
DISPLAY SETUP
Displays the date or time when the scene or still image was
recorded.
Displays both the date and time of the recording.
Displays the exposure (f-stop) and shutter speed used when
recording the image.
Displays the exposure, shutter speed, date and time of the
recording.
.
) [DISPLAY SETUP] and press (
) [DATA CODE] and press (
) the desired option and press (
to close the menu.
DISPLAY
DATA CODE
).
).
).
( ) to turn the
11).
DATE & TIME