Using The Multi-Image Screen - Canon DC100 Instruction Manual

Setting
FUNC.
Digital Effects icon
FADER
Press (
Desired fader/effect.
FUNC.
Press (
**
* You can preview the effect on the screen before pressing (
** The selected effect icon appears.
Applying
D.EFFECTS
1. Press
• To fade in, press
Start/Stop
press
• To fade out, press
pause the recording.
D.EFFECTS
2. Press
The camcorder retains the setting last used even if you turn off the digital effects
or change the recording program.

Using the Multi-Image Screen

To change the operating mode, refer to About the Operating Modes (
Mode switch:
( 37)
Options
[S.SPEED] Select how fast the images will be captured.
[MANUAL]: One image will be added to the split screen every time you
[FAST]:
[MOD.]:
[SLOW]:
[S.SPLIT] Select how many images in the split screen: [4], [9], [16].
)
)*
to activate the fader/effect.
D.EFFECTS
before you start recording, then
to start recording.
D.EFFECTS
while recording, then press
again to deactivate the fader/effect.
(except for the [ NIGHT] recording program).
D.EFFECT OFF
D.EFFECTS
press
more than 1 second to delete images from the split screen.
Every 4 frames
Every 6 frames
Every 8 frames
/ EFFECT
).
D.EFFECTS
. Hold
Start/Stop
to
11).
pressed down for
E
51