Advertisement
Transmitter for temperature
and humidity
Cat. No. 30.3249.02
Delivery contents:
Transmitter
Instruction manual
Range of application and all the benefi ts of your new
instrument at a glance
Transmitter for TFA wireless stations: e.g. Cat.
No. 30.3057.01, 30.3058.01, 35.1129.01,
35.1139.01, 35.1140.01, 35.1150.01,
35.1160.01, 35.1161.01, 35.1162.54
Replacement transmitter for 30.3221.02 and
30.3206.02
Wireless transmission of temperature and
humidity (433 MHz), distance range
up to 100 m (open fi eld)
For indoor or outdoor use
Display of temperature and humidity
For your safety:
This product is exclusively intended for the range
of application described above.
This product should only be used as described
within these instructions
WARNING
Keep this device and the batteries out of reach
of children.
Small parts can be swallowed by children (under
three years old).
Batteries contain harmful acids and may be
hazardous if swallowed. If a battery is swallowed,
this can lead to serious internal burns and death
within two hours. If you suspect a battery could
have been swallowed or otherwise caught in the
body, seek medical help immediately.
Batteries must not be thrown into a fi re,
short-circuited, taken apart or recharged. Risk
of explosion!
5
English
.
Low batteries should be changed as soon
as possible to prevent damage caused by
leaking. Make sure the polarities are correct.
Never use a combination of old and new batteries
together, nor batteries of different types. Remove
the batteries if the device will not be used for an
extended period of time. Wear chemical-resist-
ant protective gloves and safety glasses when
handling leaking batteries
CAUTION
Unauthorized repairs, alterations or changes to
the product are prohibited.
Do not expose the device to extreme temper-
atures,
vibrations or shocks.
Clean the instrument with a soft damp cloth. Do
not use solvents or scouring agents.
The transmitter is splashproof, but not watertight.
Elements:
Transmitter
Display (Fig.1)
A - Channel 1, 2, 3
B - Transmission signal
C - Temperature
D - Humidity
E - Battery symbol for
the transmitter
Getting started
Take the base station into operation according to
the instruction manual of the base station.
Open the battery compartment of the transmitter
and insert two new AA 1.5 V batteries, polarity as
illustrated. All LCD segments will be displayed for
a short moment. The display shows the temper-
ature and the humidity. The transmission of the
outdoor data takes place immediately.
To activate the transmission manually,
press the TX button.
For having more than one transmitter, select
different channels for each sensor with the 1/2/3
switch inside the battery compartment.
Close the battery compartment.
Housing (Fig.2)
A - TX button
B - 123 switch for
channel selection
C - Battery compartment
D - Table stand
(removable)
6
Advertisement
