Table of Contents
Advertisement
Controls
OSD (On-Screen Display) control keys on the front of the monitor function
are as follows:
To access OSD menu, touch any of the control keys.
To change signal input, touch the INPUT/SELECT key.
NOTE:
Exit OSD in order to change signal input.
1 Ambient Light Sensor
Human Sensor
2 LED
3 Power
4 INPUT/SELECT
5 MENU/EXIT
6 LEFT/RIGHT
7 UP/DOWN
8
/RESET
*
1
When Hot Key function is OFF, this function is disabled.
2
*
MULTI PICTURE menu.
Touch the LEFT/RIGHT to select a priority (adjustable) screen. When MULTI PICTURE is OFF, a single screen will be
displayed.
3
*
Swapping of picture by picture is not supported. The sound keeps the value of SOUND INPUT setting.
The expansion keeps the values of EXPANSION setting of each input.
Detects the level of ambient lighting and the presence of a user, allowing the monitor to make
adjustments to various settings resulting in a more comfortable viewing experience. Do not
cover this sensor.
Indicates that the power is on or off.
Turns the monitor on and off.
Enters the OSD menu. Enters OSD sub menus.
Changes the input source when not in the OSD menu. You can directly change to L/B (LOW
BLUE LIGHT) mode by touching the INPUT key for 3 seconds or more.
Accesses OSD menu. Exits the OSD sub menu. Exits OSD menu.
When not in the OSD menu, touch the key for a few seconds to activate RESTORE in
CUSTOMIZE SETTING.
Navigates to the left or right through the OSD menu.
You can adjust the USB SELECT directly by touching RIGHT while the OSD menu is off.*
DP OUT MULTISTREAM setting and TILE MATRIX ENABLE setting are changed by touching
the LEFT key for 3 seconds or more while the OSD menu is off.*
If DP OUT MULTISTREAM setting is CLONE, the setting will be changed to AUTO.
Navigates up or down through the OSD menu.
You can adjust the BRIGHTNESS directly by touching UP while the OSD menu is off.*
You can adjust the VOLUME directly by touching DOWN while the OSD menu is off.*
Resets the OSD controls back to factory settings.
Selects MULTI PICTURE when OSD menu is off*
You can swap pictures between a main screen and a sub screen by touching the
key for 3 seconds or more while Main or Sub is set in MULTI PICTURE.*
English-13
1
2
.
1,
3
*
1
1
1
/RESET
Advertisement
Table of Contents
