Related Manuals for Kaysun KI-03 S
Summary of Contents for Kaysun KI-03 S
- Page 1 INSTALLATION AND OWNER’S MANUAL Remote Controller KI-03 S Thank you for purchasing the remote controller. This manual describes the safety precaution requirement of using this product.
- Page 2 Thank you for purchasing this Kaysun remote controller. Carefully read this OPERATION AND INSTALLATION MANUAL before using the controller. It will tell you how to use the controller properly and help you if any trouble occurs. After reading the manual, please keep it for future reference.
-
Page 3: Table Of Contents
Contents Installation ...........................1 1. Installation Precautions ....................1 2. Installation Accessories ....................2 3. Dimensions of Remote Controller and Bracket ..............2 4. Installation and Fixing.......................3 5. Replace the Batteries .......................4 Operating the Remote Controller....................5 1. Using Precautions ......................5 2. Model and Key Parameters ....................6 3. -
Page 4: Installation
Installation 1. Installation Precautions Safety considerations Please read this "Safety considerations" carefully before installing Controller and be sure to install it correctly. After completing the installation, make sure the controller operates properly. Please instruct the customer how to operate the controller and how to perform maintenance. Meaning of Caution Symbols Failure to observe these instructions properly may result in property damage or personal injury. -
Page 5: Installation Accessories
Installation 2. Installation Accessories • Please check that you have all the following parts. Name Schematic Remote controller bracket Screw lid Philips head screw (M2.0*4.5) AAA battery Remote controller manual 3. Dimensions of Remote Controller and Bracket 47 mm 25 mm Figure 2.1 Dimensions of remote controller 72 mm 25 mm... -
Page 6: Installation And Fixing
Installation 4. Installation and Fixing 1) Use the screws (accessories) to fix and secure the remote controller bracket in a stable position (see Figure 2.3); Make sure you refer to "1. Installation Precautions" to determine the location. Figure 2.3 2) Slot the screw lid into the bracket cover on top of the screws (see Figure 2.4); Figure 2.4 3) Slide the remote controller vertically down into the remote controller bracket (see Figure 2.5). -
Page 7: Replace The Batteries
Installation 5. Replace the Batteries 1) Slide to move the battery cover at the back of the remote controller in the direction indicated by the arrow (Figure 2.6); Figure 2.6 2) Lift up from the lower left end of the battery cover to open it (see Figure 2.7); Figure 2.7 3) Take out the old batteries. -
Page 8: Operating The Remote Controller
Operating the Remote Controller 1. Using Precautions To gain full advantage of the controller's functions and to avoid malfunction due to mishandling, we recommend that you read this instruction manual carefully before use. The precautions described herein are classified as WARNING and CAUTION. They both contain important information regarding safety. -
Page 9: Model And Key Parameters
• Ventilate the area from time to time. Be careful when you use the air conditioner with other heating equipment. Insufficient ventilation may result in oxygen deficiency. 2. Model and Key Parameters Product Model KI-03 S Rated Voltage 3.0 V (AAA battery x 2) Ambient Temperature -5 to 43°C... -
Page 10: Button Names And Functions
Operating the Remote Controller 3. Button Names and Functions High Later Figure 3.1 External view of remote controller... - Page 11 Operating the Remote Controller Button Function Turn on/off the economic operation function Set operating mode: Auto → Cool → Mode Heat → Dry → Fan Adjust the temperature setting or Adjust downwards timer (programmed time) downwards Turn on or off the display of the indoor Display unit Timer on...
-
Page 12: Name And Function On Display Screen
Operating the Remote Controller Note: • The buttons are not available for first generation indoor units. 4. Name and Function on Display Screen Figure 3.2 Display screen of remote controller Name Display Function Temperature Displays current temperature setting Vertical swing Shows that Vertical Swing is on Horizontal swing Shows that Horizontal Swing is on... -
Page 13: Operating Methods
Operating the Remote Controller Power-on dis- Indicates a unit is turned on play Fan speed Displays the current fan speed Timer On/Off Displays times to turn on/off the unit Shows that the remote controller Lock button is locked Shows that ECO function is on Auxiliary heater Shows that auxiliary heater is on 5. -
Page 14: Fan Speed Operations
Operating the Remote Controller 2) Press each time to change the operating mode according to the order shown in Figure 3.5; Auto Cool Heat Dry Figure 3.5 3) In Auto, Cool, Dry or Heat mode, press ▲ and ▼ to adjust the temperature setting. Press ▲ and ▼ to adjust the temperature by 1°C (default). -
Page 15: Fan Direction Operations
Operating the Remote Controller 5.4 Fan Direction Operations Press to adjust the direction of the vertical louver (see Figure 3.9). Figure 3.9 1) For second generation indoor units, there are 5 swing angles, and the vertical louver swings by a particular angle each time the button is pressed (see Figure 3.10);... -
Page 16: Idu Display Operations
Operating the Remote Controller When the vertical swing is on, press to turn off this function. Note: • When the unit is turned off, the button is invalid. • Each time the vertical swing signal is sent, the icon keeps lighting up for 15s and then disappears. The indoor unit remains vertical swing operation. -
Page 17: Silent Mode Operation
Operating the Remote Controller 2) When the display of the indoor unit lights up, press to turn off the light. 5.7 Silent Mode Operation The Silent function is used by the remote controller to send the "Silent" signal to the indoor unit. The indoor unit automatically optimizes the noise it generates when it is in the "Silent"... -
Page 18: Follow Me Operations
Operating the Remote Controller Note: • In cooling mode, when ECO is set up, the Fan Speed is forced to Auto and the temperature is 26°C; in heating mode, when ECO is set up, the Fan Speed is forced to Auto and the temperature does not change. •... -
Page 19: Button Lock Operations
Operating the Remote Controller Press or ▲, ▼ to adjust the timer settings; Once the adjustment is done, the timer information is sent to the indoor unit. 2) Timer Off Operation: Press (see Figure 3.18), and the remote controller will display "Timer Off", and "0.0h Later Off" will appear in timer area. -
Page 20: Field Settings
Field Settings 1. Indoor Unit Address Query and Setting Long press the buttons for at the same time for 8 seconds (see Figure 4.1) to go to the page to set the address of the indoor unit. Long press the same buttons again for 8 seconds or press to exit. -
Page 21: Parameter Configuration For Remote Controller
Field Settings 2) Indoor Unit Address Setting: Once in the address setting page, press the button to enter the Send page. In Send page, press ▲ and ▼ to adjust the address up and down respectively. Press to send the address to the indoor unit. (See Figure 4.3) Figure 4.3 2. - Page 22 Field Settings Press ▲ and ▼ to adjust the parameter value; Once the adjustment is done, press or wait for 5 seconds to save the parameter settings. The operation sequence for the button is as shown in Figure 4.5. Figure 4.5...
- Page 23 Field Settings 2) See Table 4.1 for details. Table 4.1 parameters of remote controller Parameter Parameter Definition 7 fan speeds, temperature adjust- ment step of 0.5°C 3 fan speeds, temperature adjust- ment step of 1°C 7 fan speeds, temperature adjustment step of 1°C (default parameter) 3 fan speeds, temperature adjust- ment step of 0.5°C...