Related Manuals for Kaysun KCCHT-03
Summary of Contents for Kaysun KCCHT-03
-
Page 1: Wired Remote Controller
INSTALLATION MANUAL Wired Remote Controller KCCHT-03 Thank you very much for purchasing our product. Before using it, please read this manual carefully and keep it for future reference. -
Page 2: Safety Precaution
SAFETY PRECAUTION Read the safety precautions carefully before installing the unit. Stated below are important safety issues that must be obeyed. Conform there is no abnormal phenomena during test operation after complete, then hand the manual to the user. Meaning of marks: Means improper handling may lead to personal severe WARNING injury. -
Page 3: Other Precautions
OTHER PRECAUTIONS 1. Installation location Do not install the unit in a place with much oil, steam, sulphide gas. Otherwise, the product may deform and fail. 2. Preparation before installation 1) Check whether the following assemblies are complete. Name Remarks Wire controller Cross round head wood GB950-86 M4X20 (For Mounting on the Wall) - Page 4 INSTALLATION PROCEDURE AND MATCHING SETTING OF WIRE CONTROLLER 120mm 20mm Wire Controller Figure A Outdoor Unit electric control box Please purchase the 3-Core Shield Cable of 0.5mm x3 during installation. AC22OV 1)During installation, make sure correctly wiring the 5 wiring terminals of the wire controller: A, B connect to output terminal of adapter;...
- Page 5 4. Back cover installation 1)Use straight head screwdriver to insert into the buckling position in 4) Adjust the length of two plastic screw bars in the accessory to be standard length from the electrical box screw bar to the wall. Make the bottom of wire controller, and spin the screwdriver to take down sure when install the screw bar to the electrical box screw bar, make it the back cover.
- Page 7 Version: MD14I-044AW 202055190107...