CAMERA REBOOT*
Resetting the Camera
Pressing the reset button on the camera's control board for five (5) seconds will initialize all
environmental variables to factory default. Previous setup for IP default, time, etc. will be deleted. If a
system's IP address is lost, reset the camera back to factory default.
The following are the default network settings.
IP Mode
IP Address
Subnet Mask
Gateway
Base Port
HTTP Port
*Frequent use may cause system error.
DHCP
192.168.1.123
255.255.255.0
192.168.1.123
7000
80
2 0
Need help?
Do you have a question about the Megapix Snapit DWC-MD421D and is the answer not in the manual?