Microprocessor Control - Mitsubishi Electric MSZ-LN18VGW - E1 Service Manual

9

MICROPROCESSOR CONTROL

MSZ-LN18VGW MSZ-LN25VGW MSZ-LN35VGW MSZ-LN50VGW MSZ-LN60VGW
MSZ-LN18VGV MSZ-LN25VGV
MSZ-LN18VGB MSZ-LN25VGB
MSZ-LN18VGR MSZ-LN25VGR
WIRELESS REMOTE CONTROLLER
Operation display section
TEMPERATURE buttons
NOTE: Last setting will be stored after the unit is turned OFF with the remote controller. Indoor unit receives the signal of the
remote controller with beeps.
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
•The following indication applies regardless of shape of the indication.
Indication
Standby mode
(Only during multi system
operation)
OBH766B
MSZ-LN35VGV
MSZ-LN35VGB
MSZ-LN35VGR
Signal transmitting section
Distance of signal : About 6 m
Beep(s) is (are) heard from
the indoor unit when the
signal is received.
OPERATION SELECT button
ECONO COOL button
POWERFUL button
NIGHT MODE button
STOP/OPERATE
(OFF/ON) button
SENSOR (i-see) button
Indication of
remote controller
model is on back
Operation state Room temperature
MSZ-LN50VGV
MSZ-LN50VGB
MSZ-LN50VGR
i-save button
-
12
MSZ-LN60VGV
MSZ-LN60VGB
MSZ-LN60VGR
FAN SPEED CONTROL button
WIDE VANE button
VANE CONTROL button
PURIFIER button
DIRECTION button
TIME, TIMER set buttons
FORWARD button
BACKWARD button
WEEKLY TIMER
set buttons
RESET button
CLOCK button
Lid
Slide the lid down
to open the remote
controller. Slide it down
further to get to the
weekly timer buttons.
Lit
Blinking
Not lit