Advertisement
5. Main Cam Push Nut (Ref. No. 414) is not reusable.
If removed, install a new one.
11.1.3. Electrical Replacement Notes
1. Item numbers with capital letter E (Example: E1, E2,...) in the Ref.
No. column are shown in the exploded views.
2. The parts with "
individual parts are also supplied separately.
3. Unless otherwise specified;
All resistors are in
M= 1,000 k
All capacitors are in
All coils are in
4. Abbreviation
RTL: Retention Time Limited
This indicates that the retention time is limited for this item. After
the discontinuation of this item in production, it will no longer be
available.
NR: Non Repairable Board Ass'y
MGF CHIP: Metal Glaze Film Chip
C CHIP: Ceramic Chip
COMPLX CMP: Complex Component
W FLMPRF: Wirewound Flameproof
C.B.A.: Circuit Board Assembly
P.C.B.: Printed Circuit Board
E.S.D.: Electrostatically Sensitive Devices
5. SERVICE OF CHIP PARTS
When servicing chip parts, please use a soldering iron of less than
30 W. Refer to
page.
6. The parts with "
substituted for a 0
7. Capstan Stator C.B.A. replacement note:
The following parts on the Capstan Stator C.B.A. (VEMS0331 and
VEMS0333) are not supplied separately. Please order and replace
" mark are supplied as a unit, and their
, 1/4 W,±5%, carbon, K= 1,000
.
F, P=
H, M= 1,000
"IC, TRANSISTOR AND CHIP PART
" are 0
resistor.
F,±10%.
H,±10%.
resistor. When replacing, a wire can be
65
,
INFORMATION"
Advertisement
