Advertisement
Lever of Cassette Up Ass'y set incorrectly.
A. When installing the Front Panel Ass'y, swing the Cassette Door-
Lid all the way open until the Cassette Door tab clears the
Opener Lever.
B. Make sure that all locking tabs are aligned properly.
Then, press the Front Panel straight in.
3. Installation of VCR Chassis Unit
When installing 2 Screws (S-7), slide the Holder Unit of the
Cassette Up Ass'y (Refer to
UNLOADING OF
screws. Then, slide it back to the EJECTPosition.
Make sure that Mechanism and Cassette Up Ass'y are in the EJECT
Position. (Refer to
DISASSEMBLY/ASSEMBLYPROCEDURES.)
4. Installation of Mechanism Chassis and Cassette Up Ass'y onto
Main C.B.A.
A. Make sure the Mode Select SW. on the Main C.B.A. is in EJECT
position. If not, rotate the Mode Select SW. until the alignment
projection is in the EJECTPosition.
B. Make sure the Mechanism and Cassette Up Ass'y are in the
EJECTPosition. (Refer to
DISASSEMBLY/ASSEMBLY PROCEDURES.)
Fig. D3
"METHOD FOR LOADING/
MECHANISM" in SERVICE NOTES) totighten
"EJECT Position
"EJECT Position
22
Confirmation" in
Confirmation"in
Advertisement
