Table of Contents
Advertisement
3-2-7 Bracket Gear, Gear Joint 2, 1 Removal
1) Remove the SCREW Œ.
2) Remove the Bracket Gear ´.
3) Remove the Gear Joint 2 ˇ.
4) Remove the Gear Joint 1 ¨.
Assembly :
1) Be sure to align dot mark of Gear Joint 1 Πwith
dot mark of Gear Joint 2 ´ as shown Fig 3-12.
(Refer to Timing point1)
2) Confirm the Timing Point 2 of the Gear Joint 2 ´
and Slider Cam ˇ.
¨ GEAR JOINT 1
ˇ GEAR JOINT 2
Fig. 3-11 Bracket Gear, Gear Joint 1,2 Removal
ΠGEAR JOINT1
´ GEAR JOINT2
TIMING POINT 2
TIMING POINT 1
Fig. 3-12 Gear Joint 1,2 Assembly
Samsung Electronics
ΠSCREW
´ BRAKET GEAR
ˇ SLIDER CAM
3-2-8 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass'y Removal
1) Remove the Belt Pulley. (Refer to Fig. 3-30)
2) Remove the Gear Loading Drive Πafter releasing
Hook [A] in the direction arrow as shown in detail
drawing.
3) Remove the Slider Cam ´.
4) Remove the Lever Load ˇ, Link Load ˆ & Lever
Load ¨, Link Load Ø.
HOOK(A)
´ SLIDE CAM
Fig. 3-13 Gear Loading Drive, Slider Cam,
Lever T, S Load Ass'y Removal
Disassembly and Reassembly
ΠGEAR LOADING DRIVE
¨ LEVER LOAD T
Ø LINK LOAD T
ˇ LEVER LOAD S
ˆ LINK LOAD S
3-7
Advertisement
Table of Contents
