574
8-2. Customization
Rear sunshade
■
Reverse operation
Time
elapsed
reverse operation feature acti-
vates
*
: If equipped
Vehicle customization
■
When the speed linked door locking function and shift position linked door locking
●
function are both on, the door lock operates as follows.
• When shifting the shift lever to any position other than P, all the doors will be locked.
• If the vehicle is started with all the doors locked, the speed linked door locking func-
tion would not operate.
• If the vehicle is started with any door unlocked, the speed linked door locking func-
tion will operate.
When the entry function is off, the selecting doors to unlock cannot be customized.
●
When the doors remain closed after unlocking the doors and the automatic door lock
●
function (time elapsed before the automatic door lock function is activated if a door is
not opened after being unlocked) activates, the signals will be generated in accordance
with the operation signal (buzzers) and the operation signal (emergency flashers) set-
tings.
Some settings can be changed using a switch or the Remote Touch screen. If a setting is
●
changed using a switch, the changed setting will not be reflected on the Remote Touch
screen until the power switch is turned off and then to ON mode.
When customizing using the Remote Touch
■
Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to P. Also,
to prevent 12-volt battery discharge, leave the hybrid system operating while customiz-
ing the features.
WARNING
During customization
■
As the hybrid system needs to be operating during customization, ensure that the vehi-
cle is parked in a place with adequate ventilation. In a closed area such as a garage,
exhaust gases including harmful carbon monoxide (CO) may collect and enter the
vehicle. This may lead to death or a serious health hazard.
GS450h_300h_OM_OM30F92E_(EE)
*
(P. 380)
Function
before
the
0.7 seconds
Default
Customized
setting
setting
On
Off
0 second
0.9 seconds
1.2 seconds
1
2
3
—
— O
—
— O