182
3-3. Adjusting the seats
Recall procedure
■
Carry the electronic key that has been registered to the driving position,
1
and then unlock and open the driver's door using the smart entry & start
system or wireless remote control.
The driving position will move to the recorded position (not including the steering
wheel and HUD [head-up display] [if equipped]). However, the seat will move to a
position slightly behind the recorded position in order to make entering the vehicle
easier.
If the driving position is in a position that has already been recorded, the seat and
outside rear view mirrors will not move.
Turn the power switch to ACCESSORY mode or ON mode, or fasten a
2
seat belt.
The seat, steering wheel and HUD (head-up display) (if equipped) will move to the
recorded position.
Cancelation procedure
■
Carry only the key you want to cancel and then close the driver's door.
If 2 or more keys are in the vehicle, the driving position cannot be canceled
properly.
Turn the power switch to ON mode.
1
While pressing the "SET" button, press and hold the door lock switch
2
(either lock or unlock) until the buzzer sounds twice.
If the button could not be canceled, the buzzer sounds continuously for approxi-
mately 3 seconds.
Recalling the driving position using the memory recall function
■
Different driving positions can be registered for each electronic key. Therefore, the
●
driving position that is recalled may be different depending on the key being carried.
If a door other than the driver's door is unlocked with the smart entry & start system, the
●
driving position cannot be recalled. In this case, press the driving position button which
has been set.
Customization
■
The unlock door settings of the memory recall function can be customized.
(Customizable features: P. 561)
WARNING
Seat adjustment caution
■
Take care during seat adjustment so that the seat does not strike the rear passenger or
squeeze your body against the steering wheel.
GS450h_300h_OM_OM30F92E_(EE)