Operation of the power easy access system
■
When exiting the vehicle, the power easy access system may not operate if the seat is
already close to the rearmost position, etc.
Customization
■
The seat movement amount settings of the power easy access system can be custom-
ized. (Customizable features: P. 561)
Driving position memory
Your preferred driving position (the position of the driver's seat, steering wheel,
outside rear view mirrors and HUD [head-up display] [if equipped]) can be
recorded and recalled by pressing a button.
Three different driving positions can be recorded into memory.
Recording procedure
■
Check that the shift lever is in P.
1
Turn the power switch to ON mode.
2
Adjust the driver's seat, steering wheel, outside rear view mirrors and HUD
3
(head-up display) (if equipped) to the desired positions.
While pressing the "SET" button,
4
or within 3 seconds after the
"SET" button is pressed, press
button "1", "2" or "3" until the
buzzer sounds.
If the selected button has already
been preset, the previously recorded
position will be overwritten.
Vehicles with the driving position memory for the front passenger's seat: To
record the position of the front passenger's seat, adjust the front passenger's
seat to the desired position and perform step
passenger's side.
GS450h_300h_OM_OM30F92E_(EE)
3-3. Adjusting the seats
using the buttons on the front
4
179
3