Lexus GS450h Owner's Manual page 347

Adjusting the temperature setting
■
Press ""on
perature.
Without rear air conditioning system

When "DUAL" on the control screen is selected or the passenger's side tem-
perature control button is pressed, the temperature for the driver and passen-
ger seats can be adjusted separately.
With rear air conditioning system

When "3-ZONE" on the control screen is selected or the passenger's side
temperature control button is pressed, the temperature for the driver's, front
passenger's and rear seats (P. 358) can be adjusted separately.
The air conditioning system switches between individual and simultaneous modes
each time 3-ZONE is selected.
Adjusting the fan speed setting
■
Press
Press the "OFF" button to turn the fan off.
Change the airflow mode
■
To change the air outlets, press
The air outlets used are switched each time the button is pressed. (P. 348)
S-FLOW mode
■
Press
When
Without rear air conditioning system: Air flows to the front seats only.
With rear air conditioning system: Air flows to the front seats only, and if the pas-
senger seat is unoccupied, the set temperature, outside humidity and temperature
inside the cabin are assessed, and air flows to the driver seat only.
*
: Air may also flow to the rear seats depending on the situation.
Other functions
■
Switching between outside air and recirculated air modes (P. 351)
●
Defogging the windshield (P. 352)
●
Defogging the rear window and outside rear view mirrors (P. 352)
●
GS450h_300h_OM_OM30F92E_(EE)
5-2. Using the air conditioning system and defogger
to increase the temperature and "" to decrease the tem-
to increase the fan speed and
.
is pressed, the airflow changes as follows.
to decrease the fan speed.
.
*
347
5
*