Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Owon SLC605
Summary of Contents for Owon SLC605
- Page 1 SLC605 In-Wall Light Switch Quick Start Guide...
- Page 2 Introduction The In-wall switch allows you to remotely control your lighting or even set schedules for automatic switching. The switch can also be linked with a ZigBee-enabled LED bulb so that you can remotely adjust the level of brightness manually using the wall switch. This guide will provide you with an overview of the product and help you get through the initial setup and installation.
- Page 3 ON/OFF Switch • Reset. Operate any of ON/OFF Switch for ten times seconds until the LED indicator keeps flashing which indicates the in-wall switch has been restored to default factory settings. • Adjust brightness. Once the in-wall switch is successfully pair with a ZigBee LED bulb, you will be able to increase the brightness using the upper ON/OFF switch, and decrease the level of brigness using the lower ON/OFF switch.
- Page 4 3.1 To get started, you will need: A Gateway The mobile app In-wall switch 3.2 Installation The in-wall switch must be installed by qualified electrical personnel, keep the wiring diagram below for future reference. Neutral IN Neutral OUT NOUT LOUT Live IN Live OUT Wiring Diagram...
- Page 5 Green. Q2: How can I use the SLC605 in-wall switch to control the brighness of LED622 LED bulb? Step 1: Be sure the in-wall switch and LED bulb are in the same Gateway's network.
- Page 6 Technical Specifications Wireless Connectivity • ZigBee 2.4GHz IEEE 802.15.4 • Operating frequency: 2.4GHz • Range outdoor/indoor: RF Characteristics 100m/30m • Internal PCB antenna ZigBee Profile • ZigBee Home Automation Profile Power Input • 85~120 VAC 50/60 Hz Max. Load Current •...
- Page 7 Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the In-Wall light switch and other property. Read all the safety notices below before using the In-Wall light switch. • Avoid high humidity or extreme temperatures. •...
Need help?
Do you have a question about the SLC605 and is the answer not in the manual?
Questions and answers