Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Owon SLC620
Summary of Contents for Owon SLC620
- Page 1 SLC620 In-wall Mechanical Switch Quick Start Guide...
-
Page 2: Safety Handling
Safety Handling WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the In-wall Machnic Switch and other property. Read all the safety notices below before using the In-wall Machanical Switch. • Avoid high humidity or extreme temperatures. •... -
Page 3: Technical Specifications
Technical Specifications Wireless Connectivity ZigBee • 2.4GHz IEEE 802.15.4 ZigBee Profile • ZigBee HA1.2 • Operating frequency: 2.4GHz RF Characteristics • Range outdoor/indoor: 100m / 30m • Internal PCB antenna Physical Specifications Operating Voltage • 100~250 Vac 50/60 Hz • Temperature: -20°C ~ +50°C Operating environment •... - Page 4 Welcome The SLC620 is a ZigBee in-wall Mechanical Switch that is used to switch your lights on/off using either the switch or mobile phone. Users could automate the lighting by setting schedules. This device is available in 1, 2, 3,4 switch versions.
-
Page 5: Installation
Installation Important safety information! • The in-wall Mechanical Switch must be installed and serviced only by qualified electrical personnel. • Do not touch the terminals of the device during the testing. • Turn off all power supplying this equipment before installing. •... - Page 6 Light 1 Live Light 2 Neutral Light 3 Light 4 L4 L3 L2 L1 L N *All lights shares the same Neutral wire Wiring Diagram...
- Page 7 Attached the switch to the electrical box using the screws included in the box. Firmly attach the front panel to the switch.
-
Page 8: Get To Know Your Device
Get to know your device LED indicator ON/OFF switch LED indicator The LED status gives the following information: LED status What it means Orange LED solid Light(s) off Blue LED solid Light(s) on Blue and Orange LED flashes Enter pairing mode/Joined a network alternatively twice... -
Page 9: Configure Network
Configure Network 4.1 To get started, you will need: • A Zigbee Gateway. • A mobile phone with a mobile APP installed. 4.2 Adding to the gateway’s network 1. Set your gateway to permit joining. 2. Press and hold one of the button(s) on the switch for 6 seconds until the LED indicator flashes twice in orange and blue alternatively, indicating it is ready to join the gateway's network.
Need help?
Do you have a question about the SLC620 and is the answer not in the manual?
Questions and answers