Table of Contents
Advertisement
Status
In this screen, you can see the current settings and status of this Access Point. You
can change settings by selecting specific tab described in below.
S ystem
U
System
Uptime
Firmware Version
Wireless Configuration
Wireless Mode
SSID
The time period since the device was up.
The current version of the firmware installed in this device.
There are four modes supported, Access Point, Client (Ad-
hoc and Infrastructure), WDS Bridge and WDS repeater.
The default mode is Access Point. If you want to change to
bridge mode, please go to Wireless/WDS Setting to enable
the WDS function.
The SSID differentiates one WLAN from another, therefore,
all access points and all devices attempting to connect to a
specific WLAN must use the same SSID. It is case-sensitive
and must not exceed 32 characters. A device will not be
permitted to join the BSS unless it can provide the unique
11
Advertisement
Table of Contents
