Table of Contents
Advertisement
Group Key Life Time
Enable Pre-Authentication The two most important features beyond WPA to become
Authentication
Server
Apply Change
Reset
A ccess Control
U
When Enable Wireless Access Control is checked, only those clients whose wireless
MAC addresses listed in the access control list can access this Access Point. If the list
contains no entries with this function being enabled, then no clients will be able to access
this Access Point.
Enter the number of seconds that will elapse before the
group key change automatically. The default is 86400
seconds.
standardized
authentication, which enables secure fast roaming without
noticeable signal latency.
Preauthentication provides a way to establish a PMK
security association before a client associates. The
advantage is that the client reduces the time that it's
disconnected to the network.
RADIUS
Port: Enter the RADIUS Server's port number provided by
your ISP. The default is 1812.
IP Address: Enter the RADIUS Server's IP Address
provided by your ISP.
Password: Enter the password that the AP shares with the
RADIUS Server.
Press to save the new settings on the screen.
Press to discard the data you have entered since last time
you press Apply Change.
through
802.11i/WPA2
20
are:
pre-
Advertisement
Table of Contents
