S Tatistics - Abocom WAP257mnl User Manual

Channel Number
Encryption
Associated Clients
BSSID
TCP/IP Configuration
IP Protocol
br0 IP Address
br0 Subnet Mask
br0 Default Gateway
br0 MAC Address

S tatistics

U
The Statistics table shows the packets sent/received over wireless and ethernet LAN
respectively.
SSID. An SSID is also referred to as a network name because
essentially it is a name that identifies a wireless network.
The number of channels supported depends on the region of
this Access Point. All stations communicating with the Access
Point must use the same channel.
WEP Encryption (Wired Equivalent Privacy) is set to
Disabled by default. When WEP is enabled, data packet is
encrypted before being transmitted. The WEP prevents data
packets from being eavesdropped by unrelated people. By
using WEP data encryption, there may be a significant
degradation of the data throughput on the wireless link.
Displays the total number of clients associated to this AP. You
can have up to 64 clients to associate to this Access Point.
BSSID displays the ID of current BSS, which uniquely
identifies each BSS. In AP mode, this value is the MAC
address of this Access Point.
Display the method to get the IP of this AP, which could be
obtained by Fixed-IP or DHCP-client.
Current IP address for this Access Point
Current Subnet mask for this Access Point
Default Gateway for this Access Point
The MAC Address for this Access Point
12