Tcp/Ip; B Asic - Abocom WAP257mnl User Manual

TCP/IP

B asic

U
In this page, you can change the TCP/IP settings of this Access Point, select to
enable/disable the DHCP Client, 802.1d Spanning Tree, and Clone MAC Address.
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
Show Client
DNS Server
This field can be modified only when DHCP Client is
disabled. If your system manager assigned you static IP
settings, then you will have to enter the information provided.
Enter the information provided by your system manager.
Enter the information provided by your system manager.
Select Disable, Client or Server from the pull-down menu.
Disable: Select to disable DHCP server function.
Client: Select to automatically get the LAN port IP address
from ISP (For ADSL/Cable Modem).
Server: Select to enable DHCP server function.
253 IP addresses continuing from 192.168.1.1 to
192.168.1.253
Click to show Active DHCP Client table.
Enter the Domain Name Service IP address.
22